Please login or register.

Login with username, password and session length

Author Topic: Listen in feature  (Read 12938 times)

Desmond

  • Guest
Listen in feature
« on: June 06, 2004, 12:43:55 PM »

Do any knows how the listen in feature works
Logged

Rudy

  • Guest
Re: Listen in feature
« Reply #1 on: June 06, 2004, 05:59:32 PM »

I think you just press zero when you get the
message
Logged

Judas

  • Guest
Re: Listen in feature
« Reply #2 on: June 06, 2004, 09:28:31 PM »

does it works ok? how far can you hear from
the console?

thanks
Logged

H Marshall

  • Guest
Re: Listen in feature
« Reply #3 on: June 09, 2004, 03:53:53 PM »

Its worked every time I've tested mine. I'm
able to most all in my living room kitchen
area, about 15 foot radius or so. But then,
I have so many sirens installed that if it
trips all I'll ever hear are those...
Logged

gary

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Listen in feature
« Reply #4 on: June 28, 2004, 11:18:49 AM »

Read the instructions!  I have been working
with these daily for over 8 years.  When
the "O" is pushed, the siren stops, and the
person being called can listen in for 75
seconds. Usable range of the "listen in"
feature is relative to volume at the source.
Logged

bill

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 21
Re: Listen in feature
« Reply #5 on: July 30, 2004, 06:16:41 PM »

Is the listen code a letter O or the #
zero? I did not try the letter o but the
number zero does not seem to work.
Logged

jc

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Listen in feature
« Reply #6 on: August 03, 2004, 09:31:15 PM »

  Actually, any number on the touch tone dial
works. In my recording, I ask the listener to
press a number key.
I believe it responds to keypress tones so
it does not try to deliver the message to a
fax or a modem.
Logged

bill

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 21
Re: Listen in feature
« Reply #7 on: August 09, 2004, 01:27:18 PM »

It does not seem to work with my cell
phone ! Why?
Logged

bill

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 21
Re: Listen in feature
« Reply #8 on: August 12, 2004, 10:33:34 PM »

any answers?
Logged

chad

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
can you add 9 before dialing phone #
« Reply #9 on: August 17, 2004, 07:50:55 PM »

My phone needs to dial 9 before I can dial out.
Can the Dialer work?
Logged

glenn

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: Listen in feature
« Reply #10 on: August 23, 2004, 01:53:44 PM »

I was wondering, could you use the listen in
feature even though the alarm has not been
triggered? Is this even possible?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.