Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: MS10A causes console to beep every 4 hours  (Read 3728 times)

carl

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
MS10A causes console to beep every 4 hours
« on: April 09, 2005, 05:44:42 PM »
Hi,

I got one MS10A installed that causes the
security console to beep every once in a
while, I would guess every 4-6 hours.
Console is disarmed all the time. Nothing
is  happening that could trigger the
sensor.  Batteries are fresh.

Any ideas on what could be causing this?

thanks!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: MS10A causes console to beep every 4 hours
« Reply #1 on: April 09, 2005, 08:30:36 PM »
Every Sensor has to report back to the
console with in 4 to 6 hours. If it doesn't
the console will beep an error for that zone.
Did you maybe change the security code for
that sensor after the console learned it?
Maybe change the batteries?
Logged

j

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 43
Re: MS10A causes console to beep every 4 hours
« Reply #2 on: April 14, 2005, 11:08:27 AM »
it may even be the door contacts are spaced
to far apart.
you need to check them then restart all over
again. this was one of my issues with the
console doing the beeps.
Logged

carl

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Re: MS10A causes console to beep every 4 hours
« Reply #3 on: April 14, 2005, 03:08:21 PM »
new batteries plus re-regging from scratch
solved it. Sensor is quiet (only alarms when
it should:0 )

thanks!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.