Linking the DS7000 to Home automation

[mrdakota]

I have now the DS7000 security system now
and need to use components of the security
system to tie into my home automation,
ie.:the motion sensor?

[Brian H]

They will not work together. The Security
Console uses sensors and detectors that use
an extended data code and register with the
console. Normal X10 sensors use a standard
code. So an X10 motion sensor will not
trigger a security console and a security
sensor will not trigger an X10 module. The
Security Remote and DS7000 console have a
few buttons that do X10 address. Also the
Security Light Code is sent out whan
triggered so any lamp modules and wall
switches on the code will flash.

[maynardw]

Brian H
If you have a home automation appliance
device that creates motion close to the
DS7000 systems DS10A, would that work ?

[Brian H]

Don't know. I do know that the motion
sensors both security and standard. Detect
motion as a change in IR [aka heat] as
something moves in its path. Slow changes
like the room warms up is compensated for
and should not trigger them or in theory
anyway.

[playitagainsam]

Have new DS7000 and new Acive Home Pro
CM15A.

What do I need to know to insure these two
are installed properly so as not to
interfere with each other?

Need details please!