Turning on light with motion detector?

Started by bob, November 08, 2005, 06:31:07 PM

Previous topic - Next topic

bob

I have my 3 cameras working off their own
motion detectors and they are working fine.
Is there a way to have the motion detector
turn on a lamp along with it's assigned
camera? What is needed? Thanks.  

dave w

Yes - use a Lamp Module or Socket Rocket on
the same address as the camera power supply.
"This aftershave makes me look fat"

bob

Thanks Dave W. - What is the differance
between the Lamp module and the Socket
Rocket? Is it that the lamp module is just
that - you plug a lamp into it. And the
socket rocket? You could just screw it into
say an existing ceiling light? Do you set
the socket rocket the same way? (just click
a little numbered knob) Thanks again. Bob.  

dave w

Bob, your descriptions of both units are
correct. The Socket rocket does not have
HCUC wheels, it's address is set
electronically. You can download manuals
from here:
http://www.x10.com/support/support_manuals.ht
m
"This aftershave makes me look fat"

bob

Dave, Thanks, you've been a great help. I
think I'm all set. Bob.

SMF spam blocked by CleanTalk