Please login or register.

Login with username, password and session length

Author Topic: simple setup - what do I need?  (Read 4339 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
simple setup - what do I need?
« on: January 22, 2006, 11:22:30 PM »

I have one room with no overhead lights and
no receptacles that are wired to switches.
So I'd like to change out several existing
receptacles with the "Wall Receptacle
Module, Model SR227" so I can plug my CFLs
into them and control them with two
wireless rocker switches (on at each
entrance to the room). What else besides
the SR227's do I need to make this happen?

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 301
  • Posts: 13094
Re: simple setup - what do I need?
« Reply #1 on: January 23, 2006, 06:56:09 AM »

You will also need an X10 Tranceiver. It
takes the RF Remote signal from the wireless
switches and sends then over the powerline
to the wall socket. TM751 Tranceiver
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.