pan and tilt issues

Started by dazsedandconfused, May 15, 2005, 12:30:20 AM

Previous topic - Next topic

DSS Security & Surveillance

Mike, If you would like to give us a call we
would be more than happy to help.  Our tech
support is a lot different approach than x10.
Please give us a call at 708-439-6594 or
email us from our website www.dssecurity.net

tom

Brian H
themax; The cr13a defaults to 4 cameras.
Did  you reset it to the proper numbrer of
cameras before the test? If memory serves
me  it can do all 16 unit codes if properly
set. It will with lights but not ninjas.
well i would of thought so to and i bought
10 ninjas and could only use 4 because as i
tried to hook up more, then 1 and 5 would
turn and 2 and 6 would turn and so on. i
spent two days on it and with x-10 and they
said it wont work with more than 4 ninjas.
Even tho they had me buy the cr13a earlier
they said that wont work either.
thanks brian.

ohmarty

I have had 9 Pan&Tilt ninja cameras working for over two years. No Problem. All set to same house code. 5 are color and 4 are b/w. Just read the instructions for the remote on how to change the cameras in groups of 4. I also control them from ActiveHome. I have the color ones to turn on at dawn and off at dusk. Reverse for the b/w.

chinaboy

For some reason, my pan and tilt only works when it wants too. The camera shows excellent picture. Is there something I need to do to get it to work at all times. Does it use the my TM751 to send a signal to the pan and tilt? Is it possible that the TM751 is not working. Any recommendation will be gratefully appreciated.  Thanks

SMF spam blocked by CleanTalk