I have been working with my system for over two weeks and I have read the FAQ's and tried all.. I started out by hooking up one camera then added the second one, 3rd and 4th. I still can only get 1 camera with good quality pic no matter which way the antenna faces. If i adjust it for a good picture on one or two cameras then I lose the other two. Also when switching between camera 1,2 or 3 the 4th camera comes in then goes to the selected one.
I have two color cameras and two night time cameras. 2 colors cameras have pan and tilt. Also have the motion detectors but haven't installed them yet. I also have the cm19 transmitter and the usb hook up and TM751.
I have a wireless internet modem and it creates black horz line while turned on.. I can live with that. I don't use the modem after 9pm anyway.
I just can't get all four cameras working with a decent pic. Also when paning I loose picture and then it comes back in..
My phone operate in the range of 1.92 ghz to 1.93 ghz. I moved the receiver 12ft away from the computer and monitors. Its setting on a table away from anything. I have the cameras mounted on each side of the house facing away from the house. The only pic that is good is the front..
What portion of this system uses the house wiring to communicate and why would that interfere with the wireless section. I tried A,B,C,D and no improvement to speak of. As a last resort I am going to put the receiver (VT46a) up in the attic before I give up.. I figure all 4 cameras will only have to go through one wall before hitting the receiver.. As it is now the receiver is in the living room which is next to the front door, probably why the front camera get the best pic. The cameras on the other 3 sides of the house have to go through at least 3 walls. Anyone have any thought on my logic.
None of your camera's will use house wiring unless they are wired direct, but you are using wireless, you're using the air as you know. One of your questions is very simple to answer first, the Pan & Tilt. As it turns from one side to the other and even up and down sometimes, it willl start to lose the signal strength depending on the camera's location. If the antenna on the Pan & Tilt would stay in one position, there wouldn't be this issue, but because it moves with the camera itself, so will the signal. Finding the right "medium" for the antenna can be a little time consuming, but to be honest, that's the real issue here when it comes to your whole problem.
For all your camera's, in whatever room or location they are in, their location in that room is vital to the signals transmission and reception.Always make sure that little bump is facing towards your receiver(s) and that there is as little interference between them. That includes everything from walls, windows, doors, appliances, and furniture. Brick is a major issue in my opinion, just as a side note. Anything that's wireless, can and will cause interference, even your neighbors baby bed camera. It's just the law of nature and the only work around is to look in to getting some filters for your house wiring.
Got 8 X10 xcam's and 4 motion detectors, multiple lights switches and socket rockets, and just installed an alarm system, all are wireless of course, then add on 4 of the wired Senitnnel cam's. I like my toy's, but don't expect to get quality pic's from the wireless as I do from the wired because I know what to expect from the airwaves, and my neighbors.
Author
Topic: Multiple Camera Reception Helpful Tips! (Read 150818 times)