Please login or register.

Login with username, password and session length

Author Topic: BOOSTING RANGE  (Read 3633 times)

GMBAL4

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 76
BOOSTING RANGE
« on: June 24, 2006, 02:07:44 AM »

 is there a way to boost the range for the wireless cams. I just got my night watch cam and I have to have it close to the receiver it`s like it has a short range on it??
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: BOOSTING RANGE
« Reply #1 on: June 24, 2006, 07:04:47 AM »

Anything between the camera and the receiver?
If you have a wireless network or 2.4Ghz phone try the camera with them off. To see if you have interference.
Also make sure the antennas are correctly aimed. They have a back and front side.
Logged

SteveRF

  • Hero Member
  • *****
  • Helpful Post Rating: 13
  • Posts: 410
Re: BOOSTING RANGE
« Reply #2 on: July 10, 2006, 08:44:31 PM »

I would be interested in hearing your final solution.
I have 2 color cams and a B/W each located about 30-40 feet from my receiver.
They are all located outside of a brick home at about a 7' height.
I also have a 2.4ghz portable phone but it does not seem to interfer with my cams...
Maybe I have to be using it at the same time..not sure.
Reception from the cams with a VR31A appears ok with the va11a and much better going straight into the PC via a video card input.

I am interested if you have been able to solve your range problem ?

regards,
SteveRF
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.