Topic: CR14A not switching cameras?? (Read 3265 times)

GMBAL4 · « **on:** July 22, 2006, 01:27:53 PM »

Okay I got my new remote in it came with my remote ninja which I think is a really cool setup the only problem that I have is that I can not use my floodcam and my low light cameras and controll them with the remote. I was under the impression that I could do this with the CR14A remote?? If I turn the floodcam off the picture from my low light looks excellent or vise verse but if both cameras are on at the same time the picture has a lot of snow and static what ca I do to fix this problem?

Brian H · « **Reply #1 on:** July 23, 2006, 07:23:13 AM »

What House/Unit Codes are they set to?

GMBAL4 · « **Reply #2 on:** July 26, 2006, 09:26:18 PM »

they are set to a and unit code 1

Brian H · « **Reply #3 on:** July 27, 2006, 04:50:01 PM »

Both on the same address will turn=urn both on or off at the sametime. Two wireless cameras on at the sametime will interfere with each other. Try one on A2. The cameras work in groups of four. House Code and Unit Code 1-4;5-8;9-12 and 13-16. Example turn on A1 any camera on A2; A3 or A4 will turn off. Turn on A2 and A1; A3 and A4 go off.

GMBAL4 · « **Reply #4 on:** July 28, 2006, 12:20:48 PM »

wow

I`m impressed it works fine now thanks for the help!!

News:

Author Topic: CR14A not switching cameras?? (Read 3265 times)

GMBAL4

CR14A not switching cameras??

Brian H

Re: CR14A not switching cameras??

GMBAL4

Re: CR14A not switching cameras??

Brian H

Re: CR14A not switching cameras??

GMBAL4

Re: CR14A not switching cameras??