Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Commander stop function  (Read 4484 times)

wejaz28

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4
Commander stop function
« on: August 19, 2006, 05:21:50 PM »
I am able to program the record function but the commander will not turn off the vcr after the programmed time. I followed the directions for programming the stop mode after programming the record function, but then neither works. am i forgeting something?
Logged

FrankIII

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Commander stop function
« Reply #1 on: June 10, 2007, 04:24:19 PM »
I'm having the exact same problem.  One thing I was able to do, which didn't fix the problem, was look at the IR emitter with night vision goggles.  I see the "Record" IR code being sent but the "Stop" IR code is not being sent.  The programming when just like the instructions said.   
Logged

FrankIII

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Commander stop function
« Reply #2 on: June 10, 2007, 04:43:19 PM »
I figured it out, I didnt relize that the vcr commander cannot be changed from 5 min., unlike the active eye can.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.