Please login or register.

Login with username, password and session length

Author Topic: Addressable Camera Power Supplies  (Read 7087 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Addressable Camera Power Supplies
« on: August 28, 2006, 12:18:09 PM »

I've found documentation on, or referring to, several addressable  camera power supplies; XM10a through XM17A.  Can someone tell me the output voltage and amperage of any or all of them? 

Sales said I could buy them seperately and passed me to tech support for more information.  Tech support was less then helpful and told me I couldn't buy them.

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Addressable Camera Power Supplies
« Reply #1 on: August 28, 2006, 01:34:36 PM »

XM10A  12 VDC, 80 mA    - coaxial plug (XC10A Camera)
XM13A  12 VDC, 80 mA    - 1/8 inch stereo plug (XC14A/17A/18A/19A Cameras)
XM14A  12 VDC, 200 mA  - 1/8 inch stereo plug (Ninja Pan 'n Tilt base + camera)

Input for all is 120 VAC, 60 Hz
Units with stereo plug have dual outputs, one switched, the other not switched.
Units respond to the X10 On and Off powerline signals per codewheel address;  they do not respond to the All_Units_Off signal.
Turning one unit On turns Off the other units in its  group of 4 (like radio buttons).
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.