Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Strange problem wit WM100  (Read 3422 times)

frmichaud

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 12
Strange problem wit WM100
« on: December 15, 2022, 09:51:43 PM »
Strange problem with my WM100
I use a New wall lamp module with code M1 My program is

16H lamp M1 at 22/24 light It works
17H30 M1 at 0 it works
18H15 M1 set a 22/24 BUT the WM100 is at very low around 10/24 and impossible to correct with the samsung tablet
19H M1 Set at 70% and it works fine

Can somebody ex[laim why the order of 18H15 is not working
Francois
Logged

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 160
  • Posts: 1458
Re: Strange problem wit WM100
« Reply #1 on: December 16, 2022, 10:37:21 AM »
Try changing "17H30 M1 at 0 it works" from 0 to OFF.
Logged

frmichaud

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 12
Re: Strange problem wit WM100
« Reply #2 on: December 16, 2022, 09:00:40 PM »
Originaly it was 0 OFF , I place 1 in the bar of luminace and that dont work more
Francois
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Strange problem wit WM100
« Reply #3 on: December 17, 2022, 05:54:25 AM »
What is the model of the module?
Appliance or Dimmer?
If it is a dimmer. Is it before Soft  Start or Soft Start?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.