Please login or register.

Login with username, password and session length

Author Topic: numeric keypad  (Read 8350 times)

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 35
numeric keypad
« on: May 19, 2004, 10:39:10 AM »

has anyone found a way to use a numeric
keypad to arm/disarm the protector plus
security system instead of the keychain
remote?
Logged

paul

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 19
Re: numeric keypad
« Reply #1 on: May 24, 2004, 12:19:20 PM »

I am looking for the same thing.
Logged

robert

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 10
Re: numeric keypad
« Reply #2 on: June 09, 2004, 01:51:32 AM »

So am I.
Logged

Phil Han

  • Guest
Re: numeric keypad
« Reply #3 on: June 11, 2004, 03:03:05 AM »

There is no way to use the keypad to disarm
and arm the system, when this product was
first introduced to my security company, i
said the same thing.  The keypad is only
there to program the unit for message
dialing purposes only.  Now unless you are
really a tech you can modify the unit, but
good luck and it will void your warantee.  
Logged

robert

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 10
Re: numeric keypad
« Reply #4 on: June 14, 2004, 02:31:50 PM »

A keypad activated remote is what is needed.
I am looking into the possiblity of making
one.
Logged

brian

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: numeric keypad
« Reply #5 on: June 15, 2004, 09:10:21 PM »

I had a thought, that is only mildly tech,
you could build a numeric keypad to turn off
your system by canabalizing a keychain
remote.  By using a Garage door opener
transmitter / receiver which uses a rolling
code type technology (i.e. Gene) who makes a
keypad remote, you could wire a relay from
the receiver, which would close the contacts
of the relay, which in turn would be wired
to the contacts points of the key chain
remote button.  Or if you really want to get
out there you could not canabalize your
remote and wire up a silanoid to actually
push the button.  Just a thought.
The "rolling code" type transmitters will
still provide some measure of protection.
Logged

swerve

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 14
Re: numeric keypad
« Reply #6 on: June 20, 2005, 04:37:32 PM »

If there is a set of conacts on or in the
console that when connected arm or disarm
the system, this is what you could do:  I
have not looked into getting one in years,
12 to be exact, but radio shack used to sell
a keypad with two relays.  On relay was
activated by pressing the # and * buttons
and could be set to stay on until those
buttons were pressed again or for a few
seconds.  The other relay was activated when
the programmable four number code was keyed
into the pad.  With the same on/off
options.  Like I said, I haven't looked at
getting one for years and I doubt with
radios shack's new style, they still sell
such a thing, but I'm sure a security system
maker out there somewhere would have a
similar item.  Sorry I can't be more exact,
just an idea.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.