Contact | X10.com
Please login or register.

Login with username, password and session length
Pages: 1 [2]

Author Topic: Replacing dual switch that controls fan and light  (Read 11418 times)

MANOWAR©

  • Sr. Member
  • ****
  • Helpful Post Rating: 3
  • Posts: 75
  • Your new messiah's me.
Re: Replacing dual switch that controls fan and light
« Reply #15 on: August 29, 2009, 05:33:32 PM »
Do a search here for the other posts for a better explanation but basically the electrical noise from the fan motor tricks the switch into coming back on.
Logged
Lesbians killed the mullet for everyone.

misha680

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 28
Re: Replacing dual switch that controls fan and light
« Reply #16 on: August 29, 2009, 05:38:34 PM »
Ah I see thank you... So I guess short question is there anything I can do about it or not so much?

Thanks
Misha
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Replacing dual switch that controls fan and light
« Reply #17 on: August 29, 2009, 06:04:59 PM »
Bridging the Neutral should not be a problem. Both the fan and light where fed from the same Line and Neutral wires?
When you turn the fan off with the local button does it operate correctly and stay off?
Could be a noise pulse from the fan when it turns off, but I would think it may do it from the local button also.
Logged

misha680

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 28
Re: Replacing dual switch that controls fan and light
« Reply #18 on: August 29, 2009, 06:08:26 PM »
No. Local button works just fine.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Replacing dual switch that controls fan and light
« Reply #19 on: August 29, 2009, 07:48:51 PM »
Set the speed switch on the fan (the pull chain) at its highest speed, The XPDI3 should not turn back on if the fan switch is on high.
Logged
"This aftershave makes me look fat"

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Replacing dual switch that controls fan and light
« Reply #20 on: August 29, 2009, 08:07:36 PM »
Quote from: dave w on August 29, 2009, 07:48:51 PM
Set the speed switch on the fan (the pull chain) at its highest speed, The XPDI3 should not turn back on if the fan switch is on high.
I have the same problem and since I almost always want my fan on high, that has been my solution for some time.
A suggestion was made that I expect would work and that was to put a resistor across the load. I'm not sure but I think a 22K 1/2 W was recommended but I suggest you get confirmation on that before trying it.
« Last Edit: August 29, 2009, 08:22:44 PM by steven r »
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

misha680

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 28
Re: Replacing dual switch that controls fan and light
« Reply #21 on: August 29, 2009, 09:44:23 PM »
The fan switch thing on high worked great! Thank you

Misha
Logged
Pages: 1 [2]
« previous next »
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.