Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[smcwhorter]

Just a quick question. I have installed the ws467 and it turns the lights on and off manually, but the controllers have no effect. The transceiver is set and I set the address on the wall switch, but nothing happens remotely. What gives?

[poursha]

Try the standard fixes!:

1.  You may need a phase coupler.

2.  You may need a filter on a noise source (like a TV of computer nearby).  I had this problem with one of my switches.  It worked manual, but it would not take line signals very well.  I unplugged the TV in the next room, and it worked fine.  I installed a filter later, and that works great.

Rob

[smcwhorter]

Thanks, this makes sense. I' ll get right on it.

[Tuicemen]

You don't say what your using for a transciever many of us asume it is the cm15a but that may not be the case. (as you say the transciever is set)this makes me think your using a tm751 or something simalar. If thats the case then it could be other things be a little more discriptive with your post eg what house codes your using  and type of transciever.