Lines in picture

[jelester]

Tuicemen.
I have a a problem with my cameras.  I just recently added a router to my dsl for being able to use a wireless laptop. 
I now have lines going through my camera view.  I am sure the router and cameras are using the same frequency.  What can I do about getting rid of the lines beside moving the router(which I tried) or turning it off which works.

Jerry

[Brian H]

Have you tried all 4 of the cameras frequencies with the small switch under the rubber plug? Don't forget the receivers switch on the bottom to match the camera.
Also try the router on different channels. Maybe you can find a combination that works.

[Tuicemen]

jelester
Do as Brian suggested! I'm not sure if your router channel can be changed If not check the manual to find out exactly what frequency it is using then set the cams and the video receiver channel to the one farthest from the routers!
There is a post on here explaining the channel frequencies, a search may turn it up!

[HA Dave]

The post I think Tuicemen is refering to is here

You'll even find a great Frequency (Ghz) chart (reply #12 by netguy) there.

[Tuicemen]

Thanks Dave that was the thread I was thinking of!