Please login or register.

Login with username, password and session length

Author Topic: Problem using Video extender for PC->TV.  (Read 16113 times)

GatorDeb

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Problem using Video extender for PC->TV.
« on: February 06, 2008, 02:51:35 PM »

Here's my set up:

I have a PC audio to red/white RCA and a VGA/composite video (yellow plug) adapter.  I plug the video and audio RCAs to the sender, and then hook up the receiver to the TV.  When I go to that input, I hear a crackling noise and no video.  Turning off the sender makes the noise go away, so I have it on the right input.

Help?

Thanks! :D
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Problem using Video extender for PC->TV.
« Reply #1 on: February 06, 2008, 04:47:03 PM »


I have a PC audio to red/white RCA and a VGA/composite video (yellow plug) adapter.  I plug the video and audio RCAs to the sender, and then hook up the receiver to the TV.  When I go to that input, I hear a crackling noise and no video.  Turning off the sender makes the noise go away, so I have it on the right input.


1st step is make sure both the sender and receiver are on the same channel (A through D). Try repositioning the sender-receiver units, make sure the transmission path is as direct, and object free as possible.
Logged
Home Automation is an always changing technology
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.