Please login or register.

Login with username, password and session length

Author Topic: Just getting started; need help.  (Read 4873 times)

Nena

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Just getting started; need help.
« on: October 26, 2007, 10:05:14 PM »

Okay, I've installed my floodcams, conected the receiver to my vcr, which is connected to my TV. I've checked all the settings to make sure they match the instructions. The motion sensors are working because the lights do come on.  But still no picture. Any suggestions as to what I might be missing?
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Just getting started; need help.
« Reply #1 on: October 26, 2007, 10:21:08 PM »

If you have the Floodcam's camera mode set to auto and the channel (A/B/C/D) the same on both the Floodcam and Receiver, then you could have a distance or interference problem.

A couple things to try & check for:

1) Adjust the Receiver's antenna; try to move it closer to the Floodcam.
2) Is there any metal objects in a straight line between the Floodcam and the Receiver.
3) Most Wireless Networks and Cordless Phones work at the same 2.4GHz frequency and can interfere with the signal.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Just getting started; need help.
« Reply #2 on: October 26, 2007, 11:16:08 PM »

..........But still no picture. Any suggestions as to what I might be missing?

Is your receiver set to the correct "channel" and are you sure of your setup to the TV?
Logged
Home Automation is an always changing technology

Nena

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Just getting started; need help.
« Reply #3 on: October 26, 2007, 11:53:26 PM »

Thanks guys!  I'll check those settings first thing in the morning and get back with y'all. :)
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.