inline dimming module for ceiling fan

Started by dbemowsk, January 13, 2010, 07:34:36 PM

Previous topic - Next topic

dbemowsk

I was looking at some of the inline modules for my setup, but I cannot seem to find one that will work with a ceiling fan.  Do they make a dimming  module that will work for inductive loads?  I am looking at them for my current ceiling fan/lighting fixtures to dim the lights and control the fan speed.

Dan
Dan Bemowski
Owner of PHP Web Scripting LLC
Programmer of RemoteWatch X10
User of any X10 products I can get my hands on.

dave w

No, there is no inline dimmers for inductive load control.

You could hack one by putting an inductive dimming wall switch (XPDI3) in a box above the fan. But be advised the fan will buzz or hum with an "inductive" dimmer. It isn't real bad but probably too loud for a bedroom.

There is only one PLC - X10 wall switch will not cause the fan to hum. It uses capacitors to change the fan speed rather than triac control (three speeds).
http://www.hometech.com/modules/loswitch.html#LO-CCWHISPW

"This aftershave makes me look fat"

SMF spam blocked by CleanTalk