Need Help Baaad!!!!

[Brandt]

If its an existing 3-way or whatever, the traveler wires will already be there. They may be yellow, or red, or?

If you are creating a 3-way or more you will use one master type switch, and the other switches will be the XPT transmitter bases.

[Deemar]

Oh, man. Here's the PDF install guide for the WS13A. Follow this and you should be good.

ftp://ftp.x10.com/pub/manuals/ws13a-is.pdf

If you currently have a working setup in your house right now where 2 switches control the same light then all wires you need are present.

[Brian H]

If the original switches where three way. There is two travelers between the switches now.

[AlarmSafe]

Ok Guys I got that, now I found that only one switch in the box shares control of a light. the other two switches control different lights

[dave w]

If you are creating a 3-way or more you will use one master type switch, and the other switches will be the XPT transmitter bases.

Pomprocker - You mean Companion Switches don't you?

[AlarmSafe]

no the existing switches meaning the regular light switches, one shares a light outside, the other two; one controls the hallway, and the other another outside light

[Brandt]

If you are creating a 3-way or more you will use one master type switch, and the other switches will be the XPT transmitter bases.

Pomprocker - You mean Companion Switches don't you?

I meant if you are creating a 'new' 3-way setup versus existing 3-way setup....as in one that had not existed before and no traveler wires are in place.

[dave w]

I meant if you are creating a 'new' 3-way setup versus existing 3-way setup....as in one that had not existed before and no traveler wires are in place.

Ah-ha.