SC1200 stopped chiming

Started by rjd357, July 25, 2011, 10:47:55 PM

Previous topic - Next topic

rjd357

I recently installed a new SecuriLINK system. I had four zones set and all worked fine. Now, for no apparent reason, the chimes on the console have stopped. I have tried arming and disarming. I cleared all sensors (DS12a) and re-initialized them. I turned chiming off and back on. I replaced batteries (system is less than a month old).

So what gives? Is it defective? Can it ever be made to chime again?

Thanks.

Rob

Skinner

Is there a volume on the chime?

Brian H

Does the console ding when you arm it and ding two times on a disarm?
Even if the chime option is turned off. It should still ding and ding/ding on an arm and disarm. If it doesn't. The sounder circuit maybe defective.

In the Options Menu. There is a place to disable the chime. You may want to see if it got disables some how.
Page 26 of the users manual explains it.

dave w

"This aftershave makes me look fat"

rjd357

The unit dings when adding a new sensor so the sound works on it. And I did try turning the chimes on and off.

I guess I have to send it back for a replacement.

SMF spam blocked by CleanTalk