Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Slow RF  (Read 2263 times)

Bauerlein44

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 17
Slow RF
« on: March 04, 2013, 07:47:30 PM »
     I have x10 throughout my house. Powerline  signalling is fine. Radio Frequency was perfect as well. All of a sudden it has got a 3-4 second delay between signal and response. I am using the WGL W800USB RF through my computer. Any ideas?
Logged

kenrad

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 198
Re: Slow RF
« Reply #1 on: March 04, 2013, 08:13:04 PM »
Did you recently add something such as cordless phones, or any thing similar that might interfere with the RF signal.  Also what about batteries in the remotes are they weak?

 >!  Ken
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Slow RF
« Reply #2 on: March 04, 2013, 08:34:06 PM »
Quote from: Bauerlein44 on March 04, 2013, 07:47:30 PM
     I have x10 throughout my house. Powerline  signalling is fine. Radio Frequency was perfect as well. All of a sudden it has got a 3-4 second delay between signal and response. I am using the WGL W800USB RF through my computer. Any ideas?
What software are you using? I am using W800USB with Homeseer and the ACRF-2 plug-in. It suddenly got slower although not as slow as 3-4 seconds (maybe 2 seconds when the norm was an eye blink more than a second).

It got better after I disconnected power to the W800USB for 10 seconds and then rebooted Homeseer.
Logged
"This aftershave makes me look fat"

Bauerlein44

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 17
Re: Slow RF
« Reply #3 on: March 11, 2013, 12:19:10 AM »
batteries are good. using W800USB with home seer. i will unplug rvrything and see if that helps. no new cordless devices
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.