Full installer of AHP 3.318 now available.

Started by Tuicemen, April 28, 2014, 06:18:05 PM

Previous topic - Next topic

Tuicemen

Both versions should be available for X10 however I've updated the link in the OP.
Please Read Topic:
General Forum Etiquette
Before you post!

Brian H

I found 3.318 full installer in a link on the X10 Wiki. The one on the X10 sales site is an older version.
http://kbase.x10.com/wiki/ActiveHome_Pro

babybearjs

on windows 10... the system doesn't install properly. keeps hangingwhen X10.net needs to be installed... wound up installing the firecracker software first, then active home... seems to finally work...

frmichaud

I am triing to use it on Windows 10 Pro end it does not work it look like the driver to control the CM15A is missing
Do you have a driver for the CM15A for windows 10 or a file I must install
Thanks
Francois

toasterking

Quote from: frmichaud on November 23, 2021, 10:22:40 PM
Do you have a driver for the CM15A
You could try installing the ActiveHome Scripting SDK alongside AHP, which contains the CM15A driver.  Then install the X10Nets update from Tuicemen.

It looks like the download link is broken on Tuicemen's site, but maybe @Tuicemen can fix that for you.

Make sure you are right-clicking and selecting "Run as Administrator" for each of these.

frmichaud

I bought a new computer and it is windows 11 , the software run well on the computer BUT I dint find any of the four USB3 port which can be used
ANY idea are welcome
Thanks
Francois

jagMan653

Quote from: Tuicemen on April 28, 2014, 06:18:05 PM

X10 has given the OK to distribute this so here it is:
AHP 3.318 unregistered

This doesn't work. Looks like juicemen.net in no longer registered.


Tuicemen

I believe this is the same file that was on my site as I did supply Authinx with the file.
http://www.authinx.com/software/SW31A/AHP_3.318.exe
NOTE: This a unregister version. You'd still have to use Ahp lifejacket to get rid of the registration nags and some plugins working. >!
Please Read Topic:
General Forum Etiquette
Before you post!

Bill in AZ

I have had AHP 3.318 running on my Windows 10 Pro PC for years for all outside lighting and some inside.  A couple of months ago, something was squirrely so I wanted to uninstall it and do a clean install.  A Windows box popped up that the app couldn't be uninstalled and I had to contact the manufacturer for help.  I didn't have time to pursue it at the time so I just forced a 3.318 (re)install on top.  So not sure what did or did not happen, but AHP has generally been working correctly.  I randomly get a lamp to turn on without reason and periodically the time shifts until I download Config and Timers, the shift perhaps coincident with AC blip during weather.

Any insight into the uninstall balking?

PLCGuru

Trying to download AHP 3.318 on W10.  I get File not downloaded potential security risk.  Any ideas?

SkipWX10

Quote from: PLCGuru on June 19, 2025, 08:13:33 PM
Trying to download AHP 3.318 on W10.  I get File not downloaded potential security risk.  Any ideas?

You can generally choose to 'download anyway' or similar. I think Windows thinks that the file can be corrupted during download since it's coming from an HTTP site not HTTPS....but just my .02

PLCGuru

OK thanks, it's been a while since I've been doing this... will I need lifejacket to get 3.318 to work on W10?

Tuicemen

Lifejacket is not needed for ActiveHome pro to work.
It removes the registration nag and will give you access to some plugins like Smartmacros
Please Read Topic:
General Forum Etiquette
Before you post!

PLCGuru

Where can I find lifejacket?  I did a search and it's not clear to me, thanks.

Tuicemen

I update my OP in the Ahp lifejacket thread to include an attachment for the installer https://forums.x10.com/index.php?topic=28994.0
Please Read Topic:
General Forum Etiquette
Before you post!