Revision History

Started by Knightrider, May 28, 2018, 09:12:54 AM

Previous topic - Next topic

Tuicemen

I just got some more info on the newest update. This was tested a while ago to fix the issue android users were getting with <unknown SSiD>
Although Authinx was getting mixed results with this fix it looks like the developer went ahead and released it anyways B:( ::) :'
Please Read Topic:
General Forum Etiquette
Before you post!

Walt2

#16
Well, after waiting like forever, a new version finally came out, but it didn't fix my problem ( Can't See QR Code (Can't Access Camera) ).     :'(

Just to mention, during this long, long wait, I purchased another hardware device.   Like X10, its app uses the device's camera to read in a unique scan code to connect and register the hardware.   Unlike X10, it has no problem accessing my device's camera.  Plus, they were smart enough to offer an alternative (non-camera) method where the user/customer manual types in the numerical code/value from the scan code.

Ah well, back to waiting.   Waiting for X10 to fix their bug.    >*<
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Walt2

New bug.   B:(

With the new version of the X10 app...

On my older phone, running Android 8, I can exit the app with using the "back" button from the home screen.   Of course, I get the "are you sure" popup.

On my new phone, running Android 9, I can't exit the app.   The "back" button still works within the app, like to return to the previous screen, but no longer will it exit the app if I am at the home screen.   
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

timlight10

Quote from: Walt2 on December 18, 2019, 09:38:33 PM
On my new phone, running Android 9, I can't exit the app.   The "back" button still works within the app, like to return to the previous screen, but no longer will it exit the app if I am at the home screen.

I am having the same problem.

Knightrider

It also seems the new update broke the device status on my app.  I have WM100 timers turning on lights and the app shows they're off.

I initially thought this was due to miscommunication with my CM15A, but I've since pulled all CM15s out of service and the problem persists.
Remote control is cool,
but automation rules!

Tuicemen

Quote from: Knightrider on January 10, 2020, 07:58:38 AM
It also seems the new update broke the device status on my app.  I have WM100 timers turning on lights and the app shows they're off.

I initially thought this was due to miscommunication with my CM15A, but I've since pulled all CM15s out of service and the problem persists.
Authinx was concerned something would break with this update and asked the author for a way to revert. I'll see if this was ever done.
Please Read Topic:
General Forum Etiquette
Before you post!

dave w

Quote from: Tuicemen on January 10, 2020, 08:20:45 AM
Authinx was concerned something would break with this update and asked the author for a way to revert.
Quote Hans Solo: "Got a bad feeling about this."
"This aftershave makes me look fat"

petera

Quote from: dave w on January 11, 2020, 09:56:59 AM
Quote from: Tuicemen on January 10, 2020, 08:20:45 AM
Authinx was concerned something would break with this update and asked the author for a way to revert.
Quote Hans Solo: "Got a bad feeling about this."

At least a broken clock shows the correct time twice a day  rofl

timlight10

Any idea what the firmware version 0.0.27 brings to the table?

Tuicemen

A firmware update usually means a app update is coming. I doubt we'll notice anything till then.
Please Read Topic:
General Forum Etiquette
Before you post!