Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Moose]

I have tried 3 Broadlink devices, the Universal, the Mini and the RM Pro+, and I cannot get any of them to connect. Well, once, I got the Mini to connect to the guest network(no password), but could not repeat it. Suggestions? Anyone else have this problem?

I have tried 3 different phones and 3 apps including IHC.

[Tuicemen]

Many newer modems are dual band besure your NOT selecting a 5G network. Your phone needs to be on 2G as well during setup I believe.

[Moose]

My two frequencies have separate network names, so I have kept an eye on that. Did your 1st connection go smoothly and connect right away? Or did it take multiple attempts?

[petera]

My two frequencies have separate network names, so I have kept an eye on that. Did your 1st connection go smoothly and connect right away? Or did it take multiple attempts?

Go to your router settings, disable the 5ghz setting (if you can't disable it, turn down the signal strength) then attempt to connect to your RM device. Check your routers user manual on how you can do this.

[Moose]

I turned off the 5 ghz and tried several times, both smart mode and AP mode with no luck.
I tried my regular network and my Guest network(no password).

[Moose]

I found a thread on AVforums that talked about a connection being made but the app reported "configuration failed". I checked my client connection list on the router and it is there. How odd. Any thoughts??

[petera]

Read through this. Those units are a complete lottery https://www.reddit.com/r/homeassistant/comments/eq3jmr/rm_mini_3_setup_issues/?utm_source=xpromo&utm_medium=amp&utm_name=amp_comment_iterations&utm_term=active&utm_content=post_body

What were you going to use it for. Is it just for scanning codes.

[petera]

Here’s something simple to install on a Raspberry Pi. It’s a simple copy/paste install. Just follow the instructions exactly as they are. You can dump that Broadlink crApp once this is working. https://en.techblog.co.il/2020/06/24/installing-broadlinkmanager-on-raspberry-pi/

[Moose]

What I hoped to do was make a universal Home Theatre Remote on a 10" Tablet. I have about 5 remotes on-the-go right now. Right now I am just fighting the learning curve.

[petera]

What I hoped to do was make a universal Home Theatre Remote on a 10" Tablet. I have about 5 remotes on-the-go right now. Right now I am just fighting the learning curve.

Well try the link I gave you. You should be able to extract all the codes you need to control your equipment. In fact if you use Homegenie you could control all your home theatre equipment by enabling UPnP using the codes you extract You can of course integrate Kodi with HomeGenie too. Sky’s the limit really. Just make a list of what you want to achieve.

[Tuicemen]

Nice find petera
The Broadlinkmanager looks interesting.

 @ moose I can't  remember how easy my Broadlink was  to initialy setup however I did have issues with my phone grabing its IP so I  ended up adding a reservation in my router for the broadlink and not had any issues other then my dog ocassionaly knocking the plug out.
That made me create a program in HG tha6 checks its status.

[petera]

Those Broadlink units are pure junk. Just get something like this and hook it up to your Raspberry Pi and you’ve got all the features and more of a Broadlink and no hassle with firmware. https://www.amazon.co.uk/Energenie-ENER314-IR-Infra-Red-Controller/dp/B00T9JPA4O/ref=asc_df_B00T9JPA4O/?tag=googshopuk-21&linkCode=df0&hvadid=232000808334&hvpos=&hvnetw=g&hvrand=10397079605707123883&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1007850&hvtargid=pla-421727837205&psc=1&th=1&psc=1

[Tuicemen]

I've never tried the broadlink mini and know of no one that has good things to say about them. I have 2 RM pros both work flawless (when plugged in)  The IR pi addon board looks like a nice alternative to the mini.

[Moose]

Those Broadlink units are pure junk. Just get something like this and hook it up to your Raspberry Pi and you’ve got all the features and more of a Broadlink and no hassle with firmware. https://www.amazon.co.uk/Energenie-ENER314-IR-Infra-Red-Controller/dp/B00T9JPA4O/ref=asc_df_B00T9JPA4O/?tag=googshopuk-21&linkCode=df0&hvadid=232000808334&hvpos=&hvnetw=g&hvrand=10397079605707123883&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1007850&hvtargid=pla-421727837205&psc=1&th=1&psc=1

Very nice add-on device, but only available from the UK.

[petera]

Those Broadlink units are pure junk. Just get something like this and hook it up to your Raspberry Pi and you’ve got all the features and more of a Broadlink and no hassle with firmware. https://www.amazon.co.uk/Energenie-ENER314-IR-Infra-Red-Controller/dp/B00T9JPA4O/ref=asc_df_B00T9JPA4O/?tag=googshopuk-21&linkCode=df0&hvadid=232000808334&hvpos=&hvnetw=g&hvrand=10397079605707123883&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1007850&hvtargid=pla-421727837205&psc=1&th=1&psc=1

Very nice add-on device, but only available from the UK.

A Google should throw up US supply lines. There’s plenty of alternatives to this too. Plenty of alternatives to the Broadlink. Search IR blaster self make projects too.