Please login or register.

Login with username, password and session length

Author Topic: Stops MACROS  (Read 4851 times)

lanyu

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Stops MACROS
« on: February 10, 2006, 01:22:05 AM »

1.May I stop MACRO which carries out
carrying out another MACRO?
2. When carries out MACRO continuously
carries out many movements and Delay, when
store in interface,Cannot normally carry
out.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Stops MACROS
« Reply #1 on: February 23, 2006, 10:46:41 AM »

 ??? I'll tempt to answer!
Macros in the interface can't be stopped once there started (well if you unplug the CM15A they can) you can how ever stop a macro from starting with conditions.
You say you have a macro starting a macro so you could have a condition in the first macro that would only fire the second if conditions were met.
If you already have all the conditions you can cram into your macro you may have to use flags in place of some conditions, which can expand your conditions. But then you'd be getting into so complex stuff (not that using flags is complex but you can make it so!)  ;) With out knowing exactly what your trying to do I realy can't help. It is posible that placing a phantom module in your first macro would help!  :) ;) ;D
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

poursha

  • Sr. Member
  • ****
  • Helpful Post Rating: 1
  • Posts: 77
Re: Stops MACROS
« Reply #2 on: February 25, 2006, 03:35:45 PM »

Good answer TM.  When I first read you post...  "Macros in the interface can't be stopped once there started.."  I almost started a retort..  But, you continued your answer by giving the complicated method. 

Good summary!

RoB
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.