Contact | X10.com
Please login or register.

Login with username, password and session length
Pages: [1] 2

Author Topic: Not Installing  (Read 8156 times)

tyler boesch

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Not Installing
« on: December 29, 2004, 03:33:21 PM »
Please help.  Whenever I try to install my
software, the thing says "Cannot
communicate with network server,Error 1".
What does that mean?  I dont have a
network.  How do i fix this?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: Not Installing
« Reply #1 on: December 30, 2004, 08:21:29 PM »
You need to be connected to the internet!
Also make sure your firewall will allow the
AHP installer to access the internet.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

johnny o

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Not Installing
« Reply #2 on: January 01, 2005, 01:06:14 PM »
I received the same error (while I was
online reading this), so it's not an
internet connection problem. Then I looked
in my hardware device manager and my pc
isn't recognizing the usb device. There is
no driver installed and there's no driver
to be found. I've tried everything to find
one, to no avail.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: Not Installing
« Reply #3 on: January 01, 2005, 04:00:02 PM »
In Device Manager does the X10 interface
even show up? Like with a Yellow !
Logged

johnny o

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Not Installing
« Reply #4 on: January 01, 2005, 06:14:32 PM »
Yes, it's in the "other devices folder"
listed as "USB ActiveHome Interface" with a
big question mark and I've tried
reinstalling the driver but it can't find
one on my Win XP disc or anywhere.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: Not Installing
« Reply #5 on: January 01, 2005, 08:16:04 PM »
Then it is being identified. I believe that
X10 puts an .inf file someplace in one of
its folders. Sometimes the software can't
find the .inf file from what I have read. I
may install mine shortly as I had to get my
test bed computer running. Too many hosed
messages for me to use my main computer for
X10 stuff.
Logged

johnny o

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Not Installing
« Reply #6 on: January 02, 2005, 04:52:28 PM »
Now, the x10 guy on the phone sent me a
driver that has put an inf file in the
common files directory, but my pc says it's
not the right one when I try to install it.
Logged

johnny o

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Not Installing
« Reply #7 on: January 03, 2005, 06:32:00 PM »
Well, it works now. I had two problems.
Finally, an x10 guy sent me the right
driver for XP, and I also found out I had
to go into my router settings and open a
couple of ports (8888 & 8080) for the
program. Thanks for the help, Brian H.
Everything seems to be working now. Yaaaaay!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: Not Installing
« Reply #8 on: January 03, 2005, 07:29:11 PM »
Good to hear thet is is now ok.
Logged

ian c.

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Not Installing
« Reply #9 on: January 06, 2005, 11:36:08 PM »
PLease send me the driver file .My address
is ianc@magma.ca
THanks
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Not Installing
« Reply #10 on: January 07, 2005, 01:01:36 PM »
When you install ActiveHome Pro, the CM15A
device and drivers are installed
automatically. The installer also saves the
driver files in:

Program Files\Common
Files\X10\DriverInstall\Wireless Transceivers\

There should be three files there:

x10ufx2.inf
x10ufx2.cat
x10ufx2.sys
Logged

jake

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Not Installing
« Reply #11 on: January 08, 2005, 04:52:10 AM »
Please send me the driver file for XP SP2 i
cannot install USB Activehome
interface..thank you
Logged

johnny o

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Not Installing
« Reply #12 on: January 08, 2005, 05:49:27 PM »
Logged

cliff

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Not Installing
« Reply #13 on: February 02, 2005, 10:48:18 PM »
Trying to install on a WindowsME machine
connected to internet through router.  When
using the e-mail supplied installation link
I get as far as 22%, just after it asks if I
want to upgrade a prior installation to
which I answered yes.  Any ideas?  Might it
be the firewall in the router? If so, how do
I open it?

Thanks
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Not Installing
« Reply #14 on: February 03, 2005, 01:20:33 PM »
Cliff: If you answer "No" to the update other
applications questions, does the installation
proceed?
Logged
Pages: [1] 2
« previous next »
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.