Please login or register.

Login with username, password and session length

Author Topic: Dual Trancievers on some House Code.  (Read 2991 times)

chasonek

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Dual Trancievers on some House Code.
« on: January 26, 2005, 09:51:38 PM »

I was wondering IF it was possible to have
two trancievers set to the same house code?
The reason is because I do not have but 4
X10 items and one remote.
The problem is that I live in a mobile home
and the motion detectors can not get past
the metal of the mobile, nor can the remote.
I was wondering IF I could have one out in
my shed that is close to the motion
detectors and the one in the house?
Would the send the ON/OFF command to the
Cameras and cancel out each other or what?

Plus the motion detector can not get any
signal to my VCR Commander II.

Chas
Logged

jb

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 10
Re: Dual Trancievers on some House Code.
« Reply #1 on: February 01, 2005, 12:06:37 AM »

The problem you are most likely exp. is that
the outlets your tras is plugged into is
probably on a different phase than the
outlets of your cam etc.  all devices being
used must be on the same phase or a phase
coupler must be installed.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.