Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: x10 dial up control not functioning  (Read 3644 times)

julia

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
x10 dial up control not functioning
« on: November 05, 2005, 03:48:30 PM »

I have a TR16A touch tone controller which
used to function fine.  However, we didn't
need its functionality over the summer, so
we haven't used the dial up capability in
months.  Now, when we call, we hear the 3
beeps, but when we enter the appropriate
code to turn on/off the device, we do not
hear the confirmatory beeps and the on/off
command is not executed.  We can turn
on/off directly on the keypad of the
device, so it is clearly hooked up
correctly to the equipment we are trying to
control.  Any ideas?
Logged

gil shultz

  • Sr. Member
  • ****
  • Helpful Post Rating: 4
  • Posts: 139
Re: x10 dial up control not functioning
« Reply #1 on: September 18, 2007, 11:41:03 PM »

Good Evening,

The tone Decoder section has failed.  It could simply be because of oscillator drift to failed chips.  I have never opened one of these up but you probably need a scope and a frequency counter to repair it or maybe just a lot of luck.

Good Luck
Gil Shultz
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.