Please login or register.

Login with username, password and session length

Author Topic: CM15A now working great  (Read 2134 times)

erisso

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
CM15A now working great
« on: February 06, 2006, 01:52:21 AM »

At first with Software installed, XP would
not reconize/find USB Port ( no
communication at all. )
Here is how i did...
Remove USB cable from putor and remove ALL
software from 'Windows delete program' ,
use ‘Custom` and at each step select ‘select
all’.

1_Now unplug USB port

2_ go to your "System" in your "Control
Panel", select "Hardware"  then "Device
Manager"

3_ Clic on the + of the " Universal Serial
Bus Controllers" here you should see one
with no "ID" or "mal functioning" or "Bold"
or "unknown device" i don't quit recall, but
it was evident. Select that one by right
clicking on it, then choose "Uninstall" and
confirm with "OK" and close all windows from
this process

4_ Now you go back to your "Control Panel",
select "Add hardware"
Before clicking on "Next" be sure to connect
to Internet , from here XP identified the
module.

5_ Install AH software and restart your putor

6_  ( if your program bugs like mine did, do
next step then restart putor)
as Brian H said.....
Rt Click the AH Icon  Properties  then
Compatibility
Compatibility Mode: Windows 98
Disable Visual Themes
Turn off Advanced Text Services.

here every thing went great so one by one I
reinstalled

Compatibility Mode to NT2
Enable Visual Themes
Turn back on Advanced Text Services.

Little long to do but it worked

Eric
Logged

erisso

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: CM15A now working great
« Reply #1 on: February 06, 2006, 01:08:43 PM »

IMPORTANT INFO CORRECTION:
in step 1_ of the fallowing procedure you
should read it as 'PLUG USB CABLE'  sorry for
this
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.