Trouble with remote dimmer WS467

Started by walkert1, August 21, 2007, 04:39:38 PM

Previous topic - Next topic

walkert1

I want to be able to turn on a series of turbo fans with a WS467 (wall switch) and mini transceiver combo.
I hooked up the WS467 in place of the standard wall switch but I am only getting ~80volts at the fan receptacle.
Is the WS467 automatically set to the lowest output at the factory?

Walt2

The WS467 is designed to only work with incandescent light bulbs.

I think you are kind-of lucky there was no fire and smoke.   :o
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Brian H

#2
You need a switch that is designed for the fan load. X10 WS13A; X10Pro XPS3. Both have a mechanical switch in them that does not dim.
Note both need a Neutral Power Wire in the switch box.


-Bill- (of wgjohns.com) - Changed "Notr" to "Note".

TakeTheActive

Quote from: walkert1 on August 21, 2007, 04:39:38 PM

I want to be able to turn on a series of turbo fans with a WS467 (wall switch)...
RTFM! next time. :o
OUCH!
(and try not to burn your house down.)[/font]
;)
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER