Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[aftermarket]

hey!!

just seen the bvc program for x10 and thought i'd give it a go, looks amazing! Just running the trial version untill  i can get it working properly. I'm running vista and cm15. when i start bvc it comes up with a message stating that active home pro is not running. But it is!! then it comes up with can not load speech recongnition grammer then closes. can you help??? thanks 
 
 
 

[Jsnlong]

We have ran in to this before...what vista you running? and is your AHP 3.236

If its Vista 64 I think they never got it running right. They downgraded to another version of windows.

Could also try down grading your AHP back to the 3.204 version and then hit the upgrade button to take it to 3.228. These versions of AHP are alittle less buggy then the newer one 3.326

I'm sure the others will post in a bit... maybe I AM forgetting something

[HA Dave]

... maybe I AM forgetting something

I think your memory is better than mine!

[aftermarket]

i'm running the 3226 version

[Jsnlong]

is that 3.228 or 3.236? there isn't a 3.226 that I know of......... what version of Vista and is it 32 or 64?

[aftermarket]

3.226 and vista 32

[Jsnlong]

You need to downgrade to AHP 3.204 here is the link:
http://software.x10.com/pub/applications/activehome/        the file is named ahp_updt_204.exe

Install it over the 3.236 you have then when you open AHP 3.204 go to the help menu and Click update....... This will give you version
3.228 and should work

There is also a forum just for BVC at www.wgjohns.com

Here is a link to the other poster that had the same problem.
http://www.wgjohns.com/forums/viewtopic.php?t=136&highlight=

[aftermarket]

thanks for the help i'll give it a go in the morning and let you know

[Jsnlong]

Save you AHP file to open it in the older/newer AHP

[aftermarket]

OK the problem was with vista speech recognition not being set up. As long as its running i am able to open bvc. The next problem is the fact that the computer wont even acknowledge me. The speech recognition works well in vista however bvc struggles. I have managed to once get it to understand me. vista's speech recognition has to be open at the same time. Am i doing something else wrong?

[Tuicemen]

From what I understand Vista speech recognition has to be running at the same time! A windows thing not a BVC issue.
The Same is for windows 7 but it plays very well with BVC in my tests!
 

[aftermarket]

i dont understand it at all then. i can control vista very well. however when it comes to vbc i'm unable to even get the acknowledge beep when i say computer. i'm plugging the mic into the mic in on the sound card

[Jsnlong]

Is the mic unmuted in BVC? and have you ran the mic  setup in BVC?


What does the mic bar show in BVC is it all lite up or off....... can you see it move at all when you talk

[aftermarket]

yes the mic is unmutted and when i talk i can see the mic bar move. i have also run the mic setup within bvc. when it errors it either say mic too loud or too quite. i really want to get this working

[Jsnlong]

Did you do the downgrade to AHP 3.204 then to 3.228... That way we know for sures its not AHP 3.236 BVC and Vista fighting each other?