Please login or register.

Login with username, password and session length

Author Topic: Automation for Hotel  (Read 4515 times)

alegon

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 30
    • Siatron Automation
Automation for Hotel
« on: May 14, 2011, 01:10:37 PM »

The X10 has a device for hotel?
 I need the lights and turn off air conditioning the room when the client locked the door.
Logged
Home Automation in Brazil

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Automation for Hotel
« Reply #1 on: May 14, 2011, 02:13:31 PM »

The easiest answer is NO and "well maybe".
 
Yes X10 can control lights and 220V 20 amp appliances with simple plug-in modules, but X10 has communication reliability problems, so may not be a good choice for hotel remote control, depending on how big the hotel is and how electrically noisy it is. Electrical noise and phase coupling are problems for the X10 signal.
http://jvde.us/x10_troubleshooting.htm
Suggest you read the X10 troubleshooting tutorial to get a picture of possible problems. Then you could purchase a X10 "test kit" to see what kind of problems you can expect.
http://www.x10.com/promotions/tm751_remote_light_hmp.html?TWENTY11
Logged
"This aftershave makes me look fat"

alegon

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 30
    • Siatron Automation
Re: Automation for Hotel
« Reply #2 on: May 14, 2011, 04:29:29 PM »

I should know the functioning of the x10 and the hotel works with 110v. I need a mechanism to close the door to send a command to turn off modules x10.
 Does anyone have any suggestions?
Logged
Home Automation in Brazil

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Automation for Hotel
« Reply #3 on: May 14, 2011, 05:48:19 PM »

I should know the functioning of the x10 and the hotel works with 110v. I need a mechanism to close the door to send a command to turn off modules x10.
 Does anyone have any suggestions?
I understood the hotel is 120V for outlets and lights. The 220V module was for a room HVAC unit.
Now you need a mechanism to close the door?
Logged
"This aftershave makes me look fat"

hot4X10

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Automation for Hotel
« Reply #4 on: May 14, 2011, 06:14:02 PM »

Sounds like you should use occupancy sensors.
Logged

alegon

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 30
    • Siatron Automation
Re: Automation for Hotel
« Reply #5 on: May 15, 2011, 09:30:01 AM »

I need a device that sends a command to off modules x10 when the magnectic card is removed from reader attached to the wall inside the room.
To use sensor presence x10 if the host stand still without moving the equipment would be turned off. Cutter wear so the air conditioning be turned off to sleep when the guest
Logged
Home Automation in Brazil

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Automation for Hotel
« Reply #6 on: May 15, 2011, 09:43:01 AM »

Does the reader have a output that can trigger an X10 module to send a signal?
Logged

Deemar

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 116
Re: Automation for Hotel
« Reply #7 on: May 27, 2011, 06:08:39 PM »

Have a software developer build a daemon that polls the database of checked out rooms and runs commands on any state changes.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.