Contact | X10.com
Please login or register.

Login with username, password and session length
Pages: 1 2 [3] 4 5 6

Author Topic: airpad 10.1 xl ics  (Read 52175 times)

X10 Repair Depot

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 20
  • Posts: 311
  • I am here to help
Re: airpad 10.1 xl ics
« Reply #30 on: April 11, 2012, 07:16:46 PM »
Quote from: hairface on April 10, 2012, 08:27:03 AM
when is X10 going to jump in and bless this ICS version ?

When it is ready, and for now, the ICS version that was discussed earlier is not fully ready.

Once I have software that is good, I will post on the forum.
Logged

hairface

  • Sr. Member
  • ****
  • Helpful Post Rating: 26
  • Posts: 108
Re: airpad 10.1 xl ics
« Reply #31 on: April 11, 2012, 07:32:04 PM »
if the factory is still working on it can u ask them to add bluetooth usb to the kernel.
Logged
If I have helped you please click on "Helpful Post" under my name to the left. Thank you.

Jimdi

  • Sr. Member
  • ****
  • Helpful Post Rating: 1
  • Posts: 110
Re: airpad 10.1 xl ics
« Reply #32 on: April 12, 2012, 10:24:51 AM »
OMG that would be sooo nice if you could get inthere bluetooth usb support.....

I would love to have good audio come out of that to the stereo....


Logged

daldude

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 88
Re: airpad 10.1 xl ics
« Reply #33 on: April 15, 2012, 12:08:18 PM »
Also it would be great to have support for a GPS Dongle via the USB Port.  :)% :angel:
Logged

cjhallx

  • Hero Member
  • *****
  • Helpful Post Rating: 12
  • Posts: 170
  • Over 35 years experience from PCs to mainframes
Re: airpad 10.1 xl ics
« Reply #34 on: April 24, 2012, 06:15:37 PM »
There is a new upload file: MOMO15_ Android 4.0 firmware 20120406 on the download page of the Ployer website.
Unfortunately, the link is password protected.
Have not figured out if there is a direct URL yet.
Everyone else please feel free to try.
Logged
I have an AIRPAD X which is a re-badge of the ZENITHINK ZT280-C91 and an AIRPAD XL which is a re-badge of the PLOYER MOMO15

If I have helped you please click on "Helpful Post" under my name to the left. Thank you.

jcoleman2164

  • Full Member
  • ***
  • Helpful Post Rating: 14
  • Posts: 33
Re: airpad 10.1 xl ics
« Reply #35 on: April 26, 2012, 09:02:20 PM »
http://en.ployer.cn/uploadfile/201204/CM008-4-0406.rar  I haven't tried it yet.

You can try here too http://www.ployer.cn/prshow.asp?id=118&p=zc good luck with that one.

Ok CM008-4-0406.rar and MOMO15 android 4.03_20120406.rar are the same images but the first one comes with the update tool.
« Last Edit: April 26, 2012, 11:48:39 PM by jcoleman2164 »
Logged

hairface

  • Sr. Member
  • ****
  • Helpful Post Rating: 26
  • Posts: 108
Re: airpad 10.1 xl ics
« Reply #36 on: April 26, 2012, 09:24:10 PM »
Forget the 0406 image.....wait for the x10 release or install the 0331 image if u want ICS right now
Logged
If I have helped you please click on "Helpful Post" under my name to the left. Thank you.

untouchable4206

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 18
Re: airpad 10.1 xl ics
« Reply #37 on: April 28, 2012, 03:04:47 PM »
I uploaded the newest ics img from ployer to a sharing site so hopefully the download will be faster if anyone chooses to download it.  The only thing is that it appears to be rooted but you can change anything...like the key assignments.  Hopefully someone will find a way around that and post the directions  ;D   So far I haven't had any problems and it runs much faster than the previous release.  Have fun.


Android 4.0.3 - IMG with Update Tool
http://www.4shared.com/rar/emGCr03V/CM008-4-0406.html

   
Logged

untouchable4206

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 18
Re: airpad 10.1 xl ics
« Reply #38 on: May 02, 2012, 08:04:57 PM »
Been using the 4.0.3 image for about a week now.  No major bugs in it but does have a few.  Pretty much just browser issues though.  Also have my usb hub, keyboard, and mouse connected to my tablet to use it like a laptop.  Works very well.  Keys still aren't assigned correctly, but that was easily corrected.
Logged

dberk

  • Jr. Member
  • **
  • Helpful Post Rating: 2
  • Posts: 16
Re: airpad 10.1 xl ics
« Reply #39 on: May 05, 2012, 02:46:08 PM »
Quote from: X10 Repair Depot on April 11, 2012, 07:16:46 PM
Quote from: hairface on April 10, 2012, 08:27:03 AM
when is X10 going to jump in and bless this ICS version ?

When it is ready, and for now, the ICS version that was discussed earlier is not fully ready.

Once I have software that is good, I will post on the forum.

25 days since last comment :' from X10 Repair Depot regarding XL ICS. Any update? >*< >*< >*<
Logged

untouchable4206

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 18
Re: airpad 10.1 xl ics
« Reply #40 on: May 06, 2012, 04:37:48 PM »
No update on the X10 ics image.  The 4.0.3 image i'm using is still stable.  For now i's a good aternative.
Logged

Jimdi

  • Sr. Member
  • ****
  • Helpful Post Rating: 1
  • Posts: 110
Re: airpad 10.1 xl ics
« Reply #41 on: May 09, 2012, 07:34:50 AM »
Ok if i use the 4.0.3 image you are using...what do i have to do after install for my stuff to work?  Step by step please if you dont mind.
Logged

X10 Repair Depot

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 20
  • Posts: 311
  • I am here to help
Re: airpad 10.1 xl ics
« Reply #42 on: May 09, 2012, 09:26:52 AM »
Quote from: Jimdi on May 09, 2012, 07:34:50 AM
Ok if i use the 4.0.3 image you are using...what do i have to do after install for my stuff to work?  Step by step please if you dont mind.

The 4.0.3 image is the most recent one that I have available. The step by step instructions are identical to how you would install the X10 OS (instructions are listed on the top thread of this forum). Do keep in mind that this release is not perfect, and there are issues with it.
Logged

untouchable4206

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 18
Re: airpad 10.1 xl ics
« Reply #43 on: May 09, 2012, 10:56:34 PM »
The repair depot is correct, there are some issues , but few.  Multitouch is sketchy and as long as you don't use the factory browser your all good.  Been using this image for a while now and still no major issues. I can post the corrected key assignment files if anyone needs them.  For now "I" think this is a good alternative to the factory image.  Btw, thanks to all who helped with key corrections and other little bits to make this image usable.  Message me for any questions.
Logged

cjhallx

  • Hero Member
  • *****
  • Helpful Post Rating: 12
  • Posts: 170
  • Over 35 years experience from PCs to mainframes
Re: airpad 10.1 xl ics
« Reply #44 on: May 10, 2012, 08:26:33 AM »
Quote from: X10 Repair Depot on May 09, 2012, 09:26:52 AM
Quote from: Jimdi on May 09, 2012, 07:34:50 AM
Ok if i use the 4.0.3 image you are using...what do i have to do after install for my stuff to work?  Step by step please if you dont mind.

The 4.0.3 image is the most recent one that I have available. The step by step instructions are identical to how you would install the X10 OS (instructions are listed on the top thread of this forum). Do keep in mind that this release is not perfect, and there are issues with it.
So are you officially verifying that your next release will include Google Play (Android Market)?
Logged
I have an AIRPAD X which is a re-badge of the ZENITHINK ZT280-C91 and an AIRPAD XL which is a re-badge of the PLOYER MOMO15

If I have helped you please click on "Helpful Post" under my name to the left. Thank you.
Pages: 1 2 [3] 4 5 6
« previous next »
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.