I am a newbie to Home Assistant with some past linux experience.
Does anyone have an X10 CM15A working on Raspberry Pi 4B running Home Assistant 20237.2?
I have a lot of X10 devices throughout my home that I would like to integrate into Home Assistant.
From everything I've read I need to have mochad running. I have followed the instructions from
https://www.domoticz.com/wiki/X10_devices,_CM15_Pro. I performed all of the steps in a terminal window from Studio Code Server. The only variation is that I used a mochad-0.1.21.tgz tar file that I obtained from this link:
https://sourceforge.net/p/mochad/discussion/1320002/thread/9e758b6afc/ .
When I get to the test line: echo "pl a1 on" | nc localhost 1099 - I find that HAOS does not support the nc command.
I also do not know how to see if the HAOS is recognizing my CM15A or to see if the mochad process is even running?
I do not get any error in my terminal window when starting ./mochad
Author
Topic: Home Assistant 2023.7.2 X10 CM15A (Read 6193 times)