Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: CM11 and CM15  (Read 4474 times)

tomb

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
CM11 and CM15
« on: November 06, 2005, 07:01:12 AM »

Can you have a CM11 and CM15 controlling the
same modules?

Reason I ask is that I primarily use a Mac
but Activehome Pro is Windows only.

There is a Mac X10 package that I like but it
will only work with a CM11.

If I could use the CM11/Mac combination it
would save me a trip upstairs to my XP
machine.  ;-)

Thanks,
Thomas

Logged

gil shultz

  • Sr. Member
  • ****
  • Helpful Post Rating: 4
  • Posts: 139
Re: CM11 and CM15
« Reply #1 on: September 18, 2007, 11:45:25 PM »

Good Evening,

I see no problems.  You can have as many transmitters and receivers on the system as you like.  There is no theoretical limit to the number of modules on the same code nor the number of transmitters transmitting that code.  The transmitting and receiving devices do have a tuned circuit connected the power line and can attenuate the signal to some extent if they are not generating it.  This would become your limiting factor.  I have about 8 maxi and a few mini controllers on my system without any problems.

Good Luck
Gil Shultz


Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 298
  • Posts: 13008
Re: CM11 and CM15
« Reply #2 on: September 19, 2007, 07:04:15 AM »

Sure you can. I have many modules controlled by more than one controller and more than one module on the same Address.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.