Please login or register.

Login with username, password and session length

Author Topic: Touch Tone Controller  (Read 7580 times)

Duck69

  • Hero Member
  • *****
  • Helpful Post Rating: 36
  • Posts: 246
  • Unselfish Love
Touch Tone Controller
« on: August 20, 2006, 12:06:30 AM »

The Touch Tone Controller TR16A works with touch tone phones.
Does anyone know if it will work with a cell phone ?
« Last Edit: September 19, 2006, 10:40:45 PM by Otis69 »
Logged
"I'm not lazy, I'm just Resistant to exertion."

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Touch Tone Controller
« Reply #1 on: August 20, 2006, 12:14:24 AM »

The Touch Tone Controller TR16A works with touch tone phones.
Does anyone know if it will work with a cell phone ?
Yes. I call mine from my cell phone all time time.
I use mine on a dedicated HC for macros only. e.g. Exit macro, Welcome macro, All lights on macro, Flash lights, etc. I find the macros to be far more useful than just a direct control for individual items.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: Touch Tone Controller
« Reply #2 on: August 20, 2006, 06:54:43 AM »

As long as you can send the touch tones from the cell phone it should be fine.
Logged

Oldtimer

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 45
  • Posts: 364
  • Line Noise & Signal Sucker Fatigue Syndrome
    • Oldtimer's X10 Forum Home Page
Re: Touch Tone Controller
« Reply #3 on: August 20, 2006, 08:21:51 AM »

Ditto what steven r said.  I also use a dedicated house code and macros except for the power control module for the TR16A which is on the same house code but unit code 10.  Theory being that all the other unit codes are single digits so the two digits on the power control are less apt to be punched in error.  The reason for the power module is that I only turn ours on when we're not home so callers don't have to listen to the three beeps when we are home.  This works because I have macros that "know" when we're away, one for a short time and another for multiple days.  Works great from my cell phone but I miss the audible feedback.  It could be turned on but I don't like it for anything but X-10 control.
« Last Edit: August 21, 2006, 07:19:26 PM by Oldtimer »
Logged
Having "fun" with X-10 since 1980.

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Touch Tone Controller
« Reply #4 on: August 20, 2006, 09:27:12 AM »

...but unit code 10.  Theory being that all the other unit codes are single digits so the two digits on the power control are less apt to be punched in error....
Only problem is the single digit touch tone "0" is used for UC 10.

...I miss the audible feedback....
What has audible feedback?
The beeps on the unit require me to keep a cheat sheet with me. I use the memo field in my phone for each number. I enjoy out geeking people by pulling out my phone and using voice dialing to control my lights. e.g. Saying "Shutdown" to my phone turns off lights, makes sure the coffee pot was turned off and shuts the garage door.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Oldtimer

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 45
  • Posts: 364
  • Line Noise & Signal Sucker Fatigue Syndrome
    • Oldtimer's X10 Forum Home Page
Re: Touch Tone Controller
« Reply #5 on: August 20, 2006, 10:34:58 AM »

steven r: You're right about UC 10.  Now that you mention it I realize that I've been happily punching in "10" and the TR16A was ignoring the "1" and only hearing the last digit "0".  Another theory bites the dust.

As to audible feedback.  I've been using X-10 telephone transponders since they first came out and between the first dedicated remote for them and POT set control for the later ones have always been used to hearing some kind of tone when I pushed a button.  My more recent, small, cell  phones haven't produced a tone on a button push unless I programed them to and it took me a while to pay attention to the screen to see what I was doing.  No practical problem now, since the learning curve is long over, but I still miss it for this application.
Logged
Having "fun" with X-10 since 1980.
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.