Please login or register.

Login with username, password and session length
Pages: [1] 2 3 ... 8

Author Topic: Newer Version On Server  (Read 304393 times)

nswint

  • Full Member
  • ***
  • Helpful Post Rating: 4
  • Posts: 49
    • Shiksa
Newer Version On Server
« on: September 15, 2006, 11:01:07 PM »

A newer version of this installation is on the server.  Please re-download this installation.

Can you guys push down the right version to the order purchase/download system?
Logged

PTooTi

  • Newbie
  • Helpful Post Rating: 1
  • Posts: 6
Re: Newer Version On Server
« Reply #1 on: September 18, 2006, 03:54:29 PM »

I had to call support to get them to email my copy...still waiting for my sensors to arrive
Logged

nswint

  • Full Member
  • ***
  • Helpful Post Rating: 4
  • Posts: 49
    • Shiksa
Re: Newer Version On Server
« Reply #2 on: September 20, 2006, 11:17:36 PM »

Tech Support emailed me the install file.  Works... just having problems with RF Reception of the door/window sensors and remote.  My W800RF picks them up just fine
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Newer Version On Server
« Reply #3 on: October 01, 2006, 04:26:53 PM »

Ok I just order this recieved the link to day and get this "Newer Version On Server" please redownload!
Who Is looking after this! ??? ::) ???
X10 This is not a new problem! ::) >:(
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

KDR

  • Hero Member
  • *****
  • Helpful Post Rating: 53
  • Posts: 758
    • Home Automation Chat
Re: Newer Version On Server
« Reply #4 on: October 01, 2006, 06:34:04 PM »

Tuicemen   I had the same problem when I went to down load and found out that when X10 emailed me they included the file I needed right in the email. The version that loaded updated AHP to version 3.206

Send me a PM if you need the install file. it should work using your order number.
Logged
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Newer Version On Server
« Reply #5 on: October 01, 2006, 08:37:13 PM »

Thanks KDR! ;) :D
I sent off a PM to X10 staff and hopefully this OLD Link problem can be fixed! ::)
 :oToo many users are experiencing this!  :o
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Grumpy Mark

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
    • Scott Automation Systems
Re: Newer Version On Server
« Reply #6 on: October 08, 2006, 11:18:22 AM »

 :o Im having the same problem!!!!!!!!
Logged

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Newer Version On Server
« Reply #7 on: October 08, 2006, 05:40:12 PM »

Who Is looking after this! ??? ::) ???

X10 This is not a new problem! ::) >:(

Who do you think you're talking to?  ???  (i.e. Are you actually expecting an answer from someone??  ::) )
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Newer Version On Server
« Reply #8 on: October 08, 2006, 06:05:28 PM »

Actually I Wasn't expecting an Answer just to maybe open someones EYES at X10. It has been stated that "many there read the forums"! I know too many don't reply! :( :( :( ::) ::)
mark scott :
I would have hoped this problem was solved by now as The information was brought to the attention of the people looking after this!
In any case you can E-mail support or service and they will send you the program ;)! State your order number and the problem!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Grumpy Mark

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
    • Scott Automation Systems
Re: Newer Version On Server
« Reply #9 on: October 08, 2006, 06:36:05 PM »

Thanks Tuicemen, I have already sent an email to support after reading the posts in this forum.  Some of your posts in other forums have helped me solve a few minor issues that I have had so far.  Been messing around with x10 stuff for years, just received some new product, interface, camera, software etc.  So far quite happy, a few bugs but generally everything is ok,I haven't tried interfacing the security and automation stuff yet which was the main reason for purchasing the new stuff. 

Rant Starts Here!!!
Most of the problems I see in the forums are people just not following instructions and unreasonable expectations.  I have worked with commercial controls for over 20 years, all commercial control systems have just as many issues as X10 and cost a !@#$% of a lot more!!!
Ok I'm off my pedestal!!

www.scottautomationsystems.com
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Newer Version On Server
« Reply #10 on: October 08, 2006, 07:05:15 PM »

Quote
Some of your posts in other forums have helped me solve a few minor issues that I have had so far. 
I'm glad Some of my posts have been helpful ;) Your Praise means alot! ;) :D ;D
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

spikeinspokane

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Newer Version On Server
« Reply #11 on: October 17, 2006, 12:27:17 AM »

I'm experiencing the same problem. Just emailed support@x10.com. We'll see how long it takes.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Newer Version On Server
« Reply #12 on: October 17, 2006, 05:12:25 PM »


Rant Starts Here!!!
Most of the problems I see in the forums are people just not following instructions and unreasonable expectations.  I have worked with commercial controls for over 20 years, all commercial control systems have just as many issues as X10 and cost a !@#$% of a lot more!!!
Ok I'm off my pedestal!!

www.scottautomationsystems.com
Please Read and post to the GUESTS/LURKERS: Why Don't You Register (and Become NEWBIEs)?  (Read 353 times) thread!

I'm sure you'll be able to help many a user! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Jbojaysr

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Newer Version On Server
« Reply #13 on: October 28, 2006, 05:20:17 PM »

2006/10/27 still not fixed ! >:( received email on 24th) contacted help, no response, on 25 made another tempt, The emailed link is so broke I think its a scam to get our money and run  ;D
Logged

landmlord

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Newer Version On Server
« Reply #14 on: November 05, 2006, 05:56:36 PM »

11-5-2006 and I get the same error, and its sunday and noones home at x10, if possible could someone send me a copy.
mlord@removethis@mn.rr.com
Logged
Pages: [1] 2 3 ... 8
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.