Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Add device triggering to scenes

3 (4.2%)

History events be configureable

0 (0%)

Add a Web interface option

4 (5.6%)

Ability to sort / re-arrange devices

4 (5.6%)

Add sound alerts

0 (0%)

Add repeat option to all timer menus

2 (2.8%)

Include a Philips Hue Emulator

1 (1.4%)

RF capabilities

6 (8.3%)

 Expand scene options

0 (0%)

Create A Windows Application

1 (1.4%)

Alternate Means of Registering App

3 (4.2%)

Create an voice assitant skill

7 (9.7%)

Increase the current limit of 32 devices

5 (6.9%)

two devices, each using the same house/unit code

0 (0%)

Add photos of the controlled X10 devices

0 (0%)

Add ability to rearrange timers

0 (0%)

History report of non-configured devices

2 (2.8%)

Release the WM100 protocol

5 (6.9%)

Add the ability to sync time from the Internet

8 (11.1%)

Seperate Off / On Buttons

5 (6.9%)

Display the time of the WiFi Hub

2 (2.8%)

Add a seconds delay option to scenes

1 (1.4%)

Expand Character limits

5 (6.9%)

Expand the +/- minutes for dawn/dusk timers

2 (2.8%)

ability for app to work with more then one x10 Hub!

5 (6.9%)

Add date option to timers

1 (1.4%)

Add Date to time stamp in history

0 (0%)

Total Members Voted: 24

Voting closed: February 24, 2018, 07:58:41 AM

[Tuicemen]

To help narrow down which adds users would like to see first I've created this poll so the developer & manufacture can quickly see which adds are the most popular.
I've made it so you can change your votes in case someone puts forth a new wish that you would like to see added first.
Or you see your choice has no chance of making it this round and you wish to put your support towards something else that has a better chance.
All these wish polls are good, if your unsure what the add is you can click on the wish and be taken to the specific poll for more details.
The poll will be open for 10 days then locked.
A new poll will be created prior to the next time Authinx intends to go to the manufacture or developer for add requests.
This way nothing is ruled out!

Note: you don't need to vote for three options but you stand a better chance of at least one being implemented first.

[Tuicemen]

Although Authinx has requested all wishes be added to the poll, some will require a hardware change. I wouldn't expect those to be implemented to quickly, but I've been wrong before.

[Noam]

Although Authinx has requested all wishes be added to the poll, some will require a hardware change. I wouldn't expect those to be implemented to quickly, but I've been wrong before.

Would it make sense to split the poll into separate polls for software-only changes (like sorting) and those that would require a hardware change (like RF control)? Since the hardware changes will take longer to get implemented (and will be a separate process), those votes are wasted when they try to determine what hardware changes to make.

--Noam

[Tuicemen]

Would it make sense to split the poll into separate polls for software-only changes (like sorting) and those that would require a hardware change (like RF control)? Since the hardware changes will take longer to get implemented (and will be a separate process), those votes are wasted when they try to determine what hardware changes to make.

--Noam

I agree but, this is the way it was requested to be done.
Authinx can separate hardware from software requests easy enough.
RF control may not be that difficult to incorporate since the Wifi chip already supports IR possibilities

[dhouston]

Would it make sense to split the poll into separate polls for software-only changes (like sorting) and those that would require a hardware change (like RF control)? Since the hardware changes will take longer to get implemented (and will be a separate process), those votes are wasted when they try to determine what hardware changes to make.

--Noam

I agree but, this is the way it was requested to be done.
Authinx can separate hardware from software requests easy enough.
RF control may not be that difficult to incorporate since the Wifi chip already supports IR possibilities

The hardware used - a 64-pin STM32F103RCT6 plus one of the ESP8266 based WiFi modules - would appear to be massive overkill. Aside from WiFi, for which it has a dedicated module, the WM100 really does little more than the CM11A did, with a small PIC, all those years ago.

[Tuicemen]

The hardware used - a 64-pin STM32F103RCT6 plus one of the ESP8266 based WiFi modules - would appear to be massive overkill. Aside from WiFi, for which it has a dedicated module, the WM100 really does little more than the CM11A did, with a small PIC, all those years ago.

I like to think of the wm100 as the Cm11 version of the Wi-Fi modules.
I also like to think of the TIP10RF as the cm19 or 17 (European)version of wi-fi modules
Both CMs got merged into the CM15, will this be the case with the WM?
I hope so.

[dhouston]

Here's the WM100 hardware.

32-bit ARM STM32F103RCT6 64-pin 256KB of Flash and 48KB of RAM (plus unknown 8-pin chip)

32-bit Espressif ESP-WROOM-02 Module 18-pin 64 KB boot ROM, 64 KB instruction RAM, 96 KB data RAM and 2MB of Flash

Of course they could have replaced all-the-above with a $3.50 (retail) ESP32 and added voice recognition.

[JeffVolp]

The hardware used - a 64-pin STM32F103RCT6 plus one of the ESP8266 based WiFi modules - would appear to be massive overkill. Aside from WiFi, for which it has a dedicated module, the WM100 really does little more than the CM11A did, with a small PIC, all those years ago.

Yes, frankly I was surprised that with the horsepower in there it isn't capable of doing much more.  In addition to maintaining time correctly, we need conditional macros triggered by powerline events, one second time resolution, and proper handling of extended codes.  And since there are still a lot of people out there with SmartHome X10 devices, it would be nice if they supported the pre-set dim command that was defined by X10 back in the original X10 Technical Note.  Our 15-year old Ocelot supports all of this for not much more than the "retail" price of the WM100.

Jeff

[Tuicemen]

 frankly I was surprised that with the horsepower in there it isn't capable of doing much more. 

I believe the WM100 is capable of much more and Authinx would have liked to have initially released it with more options.
But they figured users had been waiting long enough for this and options can always be added anyways.
I believe rather then wasting time adding options I suggested, they would wait and see what end users actually wanted first.
Delays were adding up costs and the release would help offset those.

[Tuicemen]

It is really interesting to see what users are thinking here.
I expected one or two requests to just walk away with the votes.
I've re-evaluated my voting several times, thinking which options I'd get the most bang for in my setup.
This has made me change my vote a couple of times. 

52(votes currently)/21(voters) clearly some users only voted once
Maybe they'll change their voting prior to the poll closing just like me

[Bonx10]

Can backup battery be added to the voting list? (yes a hardware upgrade)  Power outages occur frequently and time sync with the internet and battery backup would allow the "show" to continue while I was away.

Thanks!

[Tuicemen]

a separate poll needs to be created fore each request so we can discuss those options separately.
Once they are created I'll add them to this poll.

[michaelbushell]

Battery backup is critical for any system with timers.

With this  upgrade, there needs to be a method to save and restore the configuration settings, and maybe applying an installed user discount if this enhancement requires us to chuck out your first version. However, I can imagine a battery pack placed between the hub and the AC. ( I believe Panasonic did that with one of their phone systems. Also, maybe the App can more permanently store the configuration for saving and restoring into the new Hub.

Coming from the CM15 world, there needs to be an intelligent  time base to drive the changing sunset times.

BTW, my 15 year experience with my X10 system clearly shows me that automatic fading up and fading down at least doubles the life of my outdoor floods. And buying them from other than Home Depot appears to also keep them running longer. (I've been logging their replacements)

[JeffVolp]

Battery backup is critical for any system with timers.

That isn't really true if the unit has access to the web and can recognize a power glitch that results in the time being lost.  When power is restored the unit can just reset its clock from a web standard time reference, such as www.time.gov.

Jeff

[dave w]

With this  upgrade, there needs to be a method to save and restore the configuration settings, and maybe applying an installed user discount if this enhancement requires us to chuck out your first version.

I do not use scenes, but my WM100 does not lose configuration when unpowered, just the time until the App re-syncs. Pretty sure scenes are in non-volatile memory also. Not sure what you are referring to, unless you are wanting to store everything in your phone AND the WM100. Pretty sure that is not high on the developers list. I guessing the next few revisions will be bug fix.